Thread Color Match

Thread basics, 2 minute read

40 wt vs 60 wt Embroidery Thread: What the Numbers Mean

The higher the weight number, the finer the thread: 60 wt is thinner than 40 wt. Most designs are digitized for 40 wt; use 60 wt for very small lettering and fine detail, ideally in designs made for it.

By Thread Color Match Editorial Team. Published September 29, 2026, updated October 5, 2026.

Why the numbers run backwards

For embroidery thread, “weight” describes how many kilometres of thread weigh one kilogram. A 60 wt thread gives more length per kilogram than a 40 wt thread, so it is thinner.

40 weight: the standard

Nearly all machine embroidery designs, and all the machine lines on this site, are 40 weight. It gives good coverage at normal stitch density.

60 weight: for fine detail

60 wt is used for small lettering and fine detail where 40 wt would look crowded. It is usually paired with a smaller needle. Stitching a design digitized for 40 wt in 60 wt gives thinner coverage, and fabric may show through fills unless the density is increased.

Does weight affect color matching?

No — color conversion compares colors, not thickness. But a thinner thread lets more fabric show, which makes a stitched area look slightly lighter or darker depending on the fabric. Match weight first, then color.

Questions people ask

Can I use 60 wt thread for a 40 wt design?

It will stitch, but fills may look thin because the design’s density assumes a thicker thread. Use it for small details or designs digitized for 60 wt.

Data updated October 5, 2026. Colors: DMC from MakeBead craft-color-codes (CC BY 4.0); other brands from Ink/Stitch palettes (GPL-3.0). Matches computed with CIEDE2000 — see the methodology.