Thread Color Match

Converting patterns, 2 minute read

No Good Thread Match? Seven Ways to Substitute a Color

Try the second and third options, look in another brand, blend two strands, or adjust neighbouring colors so the shading still works. For key colors — faces, logos, brand colors — buy the original thread.

By Thread Color Match Editorial Team. Published September 29, 2026, updated October 5, 2026.

1. Look at the next options

Every color page shows the three closest colors in each line. The second option is sometimes the better choice because it keeps contrast with neighbouring colors.

2. Search every brand

Set the converter to “All brands”. A color with no match in one line often has a near-identical match in another.

3. Blend strands (hand embroidery)

With six-strand floss you can stitch one strand each of two colors together (“tweeding”). The result reads as a mix, which can land closer to the target than either color alone.

4. Keep the order of shades

In shaded areas the eye notices order more than exact color. Choose substitutes that keep the same light-to-dark sequence as the original.

5. Shift the neighbours

If one color in a family has to change, shift its neighbours slightly in the same direction so the family still looks consistent.

6. Mind sheen

A rayon or polyester substitute for cotton will look brighter even at the same color value. Test on scrap fabric.

7. Buy the original for key colors

Skin tones, logos and brand colors are where people notice differences. One skein or cone of the original is often the best fix.

The conversion charts list the colors with no good match for every brand pair, so you can spot them before you start.

Questions people ask

What ΔE is too high for a substitute?

Above 10 the colors look clearly different. Between 5 and 10 the substitute is a noticeably different shade that can still work in small areas or backgrounds.

Data updated October 5, 2026. Colors: DMC from MakeBead craft-color-codes (CC BY 4.0); other brands from Ink/Stitch palettes (GPL-3.0). Matches computed with CIEDE2000 — see the methodology.